1970, 454, A/C

[harry quinones]

I removed the A/C wiring harness without paying too much attention and consequently, I can't remember how one of the connectors is attached. Specifically, I'm speaking of the Compressor switch 2 prong connector located in the A/c-Heater control on the console. There are 3 wires going to the connector; 2 wires (there's a light green wire and a gray wire) are hooked together, with the other wire by itself.

Question is: Does it make a difference which way the connection is made, or can it be hooked up in either of the 2 ways.

Any help would be incredibly appreciated.