Windshield Washer Pump - NCRS Discussion Boards

Windshield Washer Pump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jerry Coia

    Windshield Washer Pump

    I've installed a new pump in my 1963 roadster and am looking for ways to get it "primed". Any ideas?

    Jerry
  • Bill Clupper

    #2
    Re: Windshield Washer Pump

    Use a turkey baster, fill it with washer fluid and use it to force fluid from the reservoir lint thru the pump and nozzles.

    Comment

    • Joe C.
      Expired
      • August 31, 1999
      • 4598

      #3
      Re: Windshield Washer Pump

      Jerry:

      If your pump is working properly, and the valve assembly, and bellows are good, then it should take 3 to 4 cycles of the pump (each cycle consisting of maybe 6 strokes) for the fluid to be drawn through and out the nozzles. If not, then go after an internal problem/blockage.

      Joe

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"