63 headlight motors - NCRS Discussion Boards

63 headlight motors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Lyle Hayer

    63 headlight motors

    After taken apart the motors tonight, I found by moving the gear 180 degrees works great. thankx for the tip. Also, what are the two cut aways in the nylon washer for and should they line up to anything. Can't seem to see the purpose. Any recomendations for bearing grease and should the gear housing be packed. Does a clear coat finish deduct points?
    Thankx to all!
  • Bob R.
    Extremely Frequent Poster
    • June 30, 2002
    • 1595

    #2
    Re: 63 headlight motors

    I used a little lithium grease applied with a brush. Make sure the material you use won't break down the plastic gears. Oil based materials might be harmfull to the plastic.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"