C2 powerglide dimensions - NCRS Discussion Boards

C2 powerglide dimensions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tony reilly

    C2 powerglide dimensions

    Anyone out there happen to know the overall dimension from the bellhouse flange to the end of the tail shaft HOUSING on a C2 powerglide or the tailshaft housing legnth by itself?
  • Philip Whitaker Member# 2024

    #2
    Re: C2 powerglide dimensions

    I measured a "guess-timate" on my 64 Glide that is out of the car. The overall is 27 and 1/4" and the tailshaft housing was 11 and 1/4"

    Comment

    • Bob R.
      Extremely Frequent Poster
      • June 30, 2002
      • 1595

      #3
      Re: C2 powerglide dimensions

      Are all C-2 powerglides the same? I believe the 63 might be different. I know the 63 has a coarse spline. 64 up have fine spline. I also think the 63 shifter mounts different then the other C-2's.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"