Re: 1958 heads with extra holes - NCRS Discussion Boards

Re: 1958 heads with extra holes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Edward McComas

    Re: 1958 heads with extra holes

    The complete casting number is 3748770, dated D 24 8. I could be off a day or two on the casting date, but I am absolutely sure about the casting number. The heads are staggered hole for the valve covers.

    This was the first set of heads like this that I had ever seen. I think I got my information about the air pump mounting from Colvin's book Chevrolet by the Numbers , 1955-1959. Apparently they are a fairly rare item, as air ride suspension wasn't a big hit in 1958 or 1959. I understand that some service replacement 770 heads had these holes in them as well.

    I think I will go out and take some pictures of these heads (I used to have some, but can't find them now) so everyone can see what I am talking about. Maybe there is a Restorer article in this topic.
  • Jack H.
    Extremely Frequent Poster
    • April 1, 1990
    • 9906

    #2
    Re: 1958 heads with extra holes

    Hum, something nags at me regarding certain truck configurations back then sporting air-over/hydraulic brake feature.... Remember, the casting number was just that--an ID for the basic metal pour. It was secondary operations (drilling, tapping, Etc.) that turned cast no. X into part no. Y....

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"