C2 Jack Board Label Placement - NCRS Discussion Boards

C2 Jack Board Label Placement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rich G.
    Extremely Frequent Poster
    • August 31, 2002
    • 1396

    C2 Jack Board Label Placement

    I have what I believe is an original jack board in my 66. The positraction label is above the jacking instructions (what's left of them both) when the board is held up so you can read them. They are on the left side of the board when the board is installed. Everything I read says the jacking instructions should be above the posi label. Anybody have a real original? I only assume this is original because of the condition, but it could have been mislabeled a long time ago.

    Any thoughts?

    Rich Giannotti 38594
    1966 L79 Convertible. Milano Maroon
    1968 L71 Coupe. Rally Red (Sold 6/21)
    1963 Corvair Monza Convertible
  • Jack H.
    Extremely Frequent Poster
    • April 1, 1990
    • 9906

    #2
    Re: C2 Jack Board Label Placement

    I've seen original jack boards where labels were randomly placed. I've also seen more than one original, where the J.P. Stevens carpet ID label was UNDERNEATH (partially or wholly) the St. Louis applied jacking/posi labels....

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"