Center carb stud for 67 tripower - NCRS Discussion Boards

Center carb stud for 67 tripower

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Steve B.
    Extremely Frequent Poster
    • March 1, 2002
    • 1190

    Center carb stud for 67 tripower

    I have what I believe are two original center carb studs for a 67 3x2 setup. The first one looks exactly like the one pictured in the 67 judging manual. The unthreaded section measures about 1/2 inch. Overall length is about 2 inches. The second one is identical with the exception that the unthreaded part is about 3/4 or an inch, overall length about 2 1/4 inch. Is the second one correct for a 67 3x2 too or is it correct for another application? Thanks in advance.
  • Gene M.
    Extremely Frequent Poster
    • April 1, 1985
    • 4232

    #2
    Re: Center carb stud for 67 tripower

    Steve,
    Unless one has a steel scale to set next to it, I doubt anyone is going to tell the difference.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"