Hi Guys.......... I am hoping there are some of you who attended my seminar last Friday at Carlisle and would like to hear your feedback. I was limited in time so I threw out a lot of information to the group. One thing I really could have used was a clip on mic so that I could be sure everyone heard me. I had some good questions from the group and there were a lot of guys coming up at the end when I had to pack up and get out before the next presentation was to start. So what are your thoughts? Is it still worthwhile to do, would you be interested if I can arrange to get more time and really dig into a subject. Maybe something like breaking down a box and setting it up for preload and lash. while I couldn't do the blueprint work because I need access to my machine shop I could show you how to set up a box or at least check it so you know what it needs? Or maybe tuning a posi as there was interest in how that is different then a stock posi? It's a whole year away now so I would need to figure out what you would like and then see if there is anyway to present it. A rolling workbench with a vise would be needed.