67' lower A arm shaft orientation; up/down - NCRS Discussion Boards

67' lower A arm shaft orientation; up/down

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dave K.
    Very Frequent User
    • January 24, 2013
    • 278

    67' lower A arm shaft orientation; up/down

    Is there a right side up and right side down for the lower a arm shaft? I see there is a serial number just before the two winged holes on the shaft. Should it be facing up toward the engine or down toward the ground?....or doesn't it matter?
    Dave
  • Wayne W.
    Extremely Frequent Poster
    • April 30, 1982
    • 3605

    #2
    Re: 67' lower A arm shaft orientation; up/down

    Yes the pad that has two bolts is flat on the top side. That side sets flat when bolted.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"