Please help me out . The judging manual discribed 1/2 bolt ( WB ) with lock washer on all 4 positions. In a picture in the Judging Manual showing the position of the horn on an a/c BB car driver side the illustration shows a hex head bolt with intergrated washer securing it to the lower drivers side shroud bolt hole. Well I have 2 Benchmark cars that all 4 bolts are hex head with intergrated washer also the passenger side horn is secured to the revited plate with the same. Are original cars right or the judging manual ?
-
-
Re: 1967 BB Radiator shroud to support bolts ?
The newest judging guide shows the drivers side horn bracket being held on with a 5/16 hex head bolt with a washer going though the condenser bracket and fan shoud. So you should have three WB bolts and the one "fender bolt" holding the fan shoud on with a BB and AC.
Comment