Identify this intake seal

[King M.]

image.jpgCan anyone identify this intake seal. It is gm embossed.

[Tom B.]

Re: Identify this intake seal

I can't get the attachment to open.

[King M.]

Re: Identify this intake seal

Picture works now

[Joe R.]

Re: Identify this intake seal

Looks to be one of the many versions that GM sold thru the years. It's at the rear of the intake manifold to block. It's the one that squirts out when the intake manifold is tightened in place. The distributor goes thru the circle. I always like to use the one with tits to match the holes in the block. Actually I like just squirting some silicone in the crack after the manifold is in place. Doesn't leak or quirt out!

JR

[Jimmy G.]

Re: Identify this intake seal

Actually Joe it is the front one where the oil fill goes

[Timothy B.]

Re: Identify this intake seal

Actually Joe it is the front one where the oil fill goes

I agree with Jimmy plus I believe it's the old style, my guess is sixties. The arrangement makes sense because the PCV valve pulls from around the bottom of the motor where as the newer style the PCV can pull from the lifter valley.

[Joe R.]

Re: Identify this intake seal

OK, sounds good to me!

JR