turn signal handle bolt

[Robert D.]

can someone tell me what the length and tread size of the turn signal handle bolt is on a 67. i believe its part number 9425576. is it a phillips head or a hex head bolt the one on my car is plillips put the ones in the parts catalogs are hex heads
thanx
Bob

[Bill L.]

Re: turn signal handle bolt

Looking at the '67 AIM on pages G234 (regular steering) and G385 (tele steering) a Philips head is clearly shown (only in the drawing though) --- no other specific mention of "Philips Head" -------

The part number is displayed on page G234 as 9425578 --- but again no other info ---

I would go with the Philips ---maybe Joe Lucia can shed some light?

Regards
Bill

[Joe L.]

Re: turn signal handle bolt

Looking at the '67 AIM on pages G234 (regular steering) and G385 (tele steering) a Philips head is clearly shown (only in the drawing though) --- no other specific mention of "Philips Head" -------

The part number is displayed on page G234 as 9425578 --- but again no other info ---

I would go with the Philips ---maybe Joe Lucia can shed some light?

Regards
Bill

Bill and Bob-------



GM #9425578 was a cross recess (Phillips) TRUSS HEAD screw of thread size 8-32 and 5/8" thread length. It was phosphate finished.

[Robert D.]

Re: turn signal handle bolt

Thank You guys
Bob

[Joe L.]

Re: turn signal handle bolt

Bob-------



Here are a few photos of a GM #9425578 [none for sale]:


DSCN3132.jpgDSCN3133.jpgDSCN3134.jpgDSCN3135.jpg