Starter Solenoid Wire Clip for LS5? - NCRS Discussion Boards

Starter Solenoid Wire Clip for LS5?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mark E.
    Extremely Frequent Poster
    • April 1, 1993
    • 4498

    Starter Solenoid Wire Clip for LS5?

    Should a 1970 LS5 have a solenoid wire clip? I'm trying to determine if my car shouldn't have a clip, or if it's just missing:

    - Page 98 of the TIM&JC says "A grey (misspelled "gray" in the manual) phosphate-plated spring clip encircles the solenoid and holds the wires to the solenoid..." In context, this implies all engines should have a clip, but doesn't say specifically.

    - AIM page 12-A11 in the Electrical section shows clip PN 3856490 on a small block. But page LS5-A5 in the big block section doesn't show a clip on the solenoid.

    - Paragon says this PN is for 66-67 w/427 and all 68-82: https://www.paragoncorvette.com/p-35...wire-clip.aspx

    If the LS5 should have a solenoid clip, which wires go through it? AIM page 12-A11 shows a small block with only the battery cable in the clip. What about the other solenoid wires?
    Mark Edmondson
    Dallas, Texas
    Texas Chapter

    1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
    1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: Starter Solenoid Wire Clip for LS5?

    Originally posted by Mark Edmondson (22468)
    Should a 1970 LS5 have a solenoid wire clip? I'm trying to determine if my car shouldn't have a clip, or if it's just missing:

    - Page 98 of the TIM&JC says "A grey (misspelled "gray" in the manual) phosphate-plated spring clip encircles the solenoid and holds the wires to the solenoid..." In context, this implies all engines should have a clip, but doesn't say specifically.

    - AIM page 12-A11 in the Electrical section shows clip PN 3856490 on a small block. But page LS5-A5 in the big block section doesn't show a clip on the solenoid.

    - Paragon says this PN is for 66-67 w/427 and all 68-82: https://www.paragoncorvette.com/p-35...wire-clip.aspx

    If the LS5 should have a solenoid clip, which wires go through it? AIM page 12-A11 shows a small block with only the battery cable in the clip. What about the other solenoid wires?
    Mark------


    As far as I know, the clip was used for all 1970 applications, big block and small block. As a matter of fact, the purpose of the clip would be no different for the two engine types. The clip retains the wire bundle that goes to the solenoid which is exactly the same for both engines.
    In Appreciation of John Hinckley

    Comment

    • Mark E.
      Extremely Frequent Poster
      • April 1, 1993
      • 4498

      #3
      Re: Starter Solenoid Wire Clip for LS5?

      Thanks Joe. Sounds like I need to find and install a solenoid wire clip.
      Mark Edmondson
      Dallas, Texas
      Texas Chapter

      1970 Coupe, Donnybrooke Green, Light Saddle LS5 M20 A31 C60 G81 N37 N40 UA6 U79
      1993 Coupe, 40th Anniversary, 6-speed, PEG 1, FX3, CD, Bronze Top

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"