K66 Conversion - NCRS Discussion Boards

K66 Conversion

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Walter R.
    Very Frequent User
    • January 6, 2009
    • 269

    K66 Conversion

    I am converting 427/425 back to K66 ignition. I have installed new engine wiring and TI harness. I have two pink wires attached to a side connector on engine harness and a single pink wire on engine harness. Which wire do I connect to the pink wire on TI harness? I have another single pink coming from dash harness but this connects to white wire on TI harness. I know where other wires in the two harnesses are attached.
  • Richard M.
    Super Moderator
    • August 31, 1988
    • 11302

    #2
    Re: K66 Conversion

    Walter, This thread may help, although for a '67, similar IIRC....
    https://www.forums.ncrs.org/showthre...rness-Question

    I don't have a '66 AIM but the UPC K66 section will show the interconnects.

    Rich

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"