62 Clutch return spring install

[Edward J.]

Any tricks to install the monster return spring on a 62.

[Jim D.]

Re: 62 Clutch return spring install

It takes only a few seconds following the procedure in the ST-12 and using a crescent wrench as shown.

[Frank D.]

Re: 62 Clutch return spring install

Its actually an "over center" spring....folks are mistakenly intimidated by its girth...it comes off easy. As mentioned, the ST-12 procedure works fine if you place the crescent wrench as per the attachment and "rock" the Z-bar until you reach the 'sweet spot' and the spring will almost fall off.

[Edward J.]

Re: 62 Clutch return spring install

Guys thanks, Frank thanks for PDF