PV ISSUE - Ignition tunnel light

[Ron N.]

Any advice/direction on how I can fix this problem would be appreciated.


Thanks,


Ron

[Gene M.]

Re: PV ISSUE - Ignition tunnel light

Ron,
If you just start the ignition key into the ignition switch about 1/4" you will see the light reflect on the top of the key. Nick knows of this way to verify of the illumination.

[Michael J.]

Re: PV ISSUE - Ignition tunnel light

I should also point out the Lone Star Regional is in October.

[Edward J.]

Re: PV ISSUE - Ignition tunnel light

Gene, kind of curious about this as I know my bulb works on my 63 but can never see the light, even in a darken garage. The description on the PV manual is confusing to say the least as its was posted. Does anyone have a pic. ?

[Ron N.]

Re: PV ISSUE - Ignition tunnel light

I will try what you recommend to verify if I have light.

Thanks Gene.

[Ron N.]

Re: PV ISSUE - Ignition tunnel light

Hi Gene. I tested it again in the closed garage with the car completely covered and with the key 1/4 in.

Hallelujah, I saw the light.

Wow, lighting the ignition switch is not much help with such a dim light. Anyway, I get to check off another item in my prep for PV.

Thanks again for your help.

Ron

[Ron N.]

Re: PV ISSUE - Ignition tunnel light

I just posted this reply (below) to Gene's post 9/15 on the subject.

Ron

Hi Gene. I tested it again in the closed garage with the car completely covered and with the key 1/4 in.

Hallelujah, I saw the light.

Wow, lighting the ignition switch is not much help with such a dim light. Anyway, I get to check off another item in my prep for PV.

Thanks again for your help.

Ron

[Richard M.]

Re: PV ISSUE - Ignition tunnel light

Here's a '67 night time photo for the curious minds.

P3210055.jpgP3210058.jpg