Bowl screws for 67 tri-carb 2300

[Ralph P.]

I need to know the correct overall length of the 2300 slotted carb screws. I have some that are 2 1/2 inches and appear too short....

THANKS

[John H.]

Re: Bowl screws for 67 tri-carb 2300

I need to know the correct overall length of the 2300 slotted carb screws. I have some that are 2 1/2 inches and appear too short....

THANKS

Ralph -

There are two lengths of 2300 bowl screws - those used on the center carb (with a metering block) are longer, and those used on the end carbs (which don't have metering blocks) are shorter. The shorter screws won't work on the center carb.


3x2_3.jpg

[Joe L.]

Re: Bowl screws for 67 tri-carb 2300

Ralph -

There are two lengths of 2300 bowl screws - those used on the center carb (with a metering block) are longer, and those used on the end carbs (which don't have metering blocks) are shorter. The shorter screws won't work on the center carb.




[ATTACH=CONFIG]65836[/ATTACH]

John and Ralph-----


Yes, there are the two lengths-------2-1/2" and 1-7/8". I don't know of any longer ones.