1966 427 front knuckle / spindle and bearings - NCRS Discussion Boards

1966 427 front knuckle / spindle and bearings

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Gene M.
    Extremely Frequent Poster
    • April 1, 1985
    • 4232
    #16
    Re: 1966 427 front knuckle / spindlle and bearings

    Originally posted by Patrick Cavanagh (57907)
    Joe

    Thanks Joe. Is it correct that the later spindles (69-83) also had larger bolts holding the steering arms to the spindles along with different splash shields?

    pat

    Bolts on 63-67 are 7/16". The 69 up are 1/2" bolts. I don't recall the bolt size on 68 but I think it is 1/2" too. Which means the caliper mount along with splash shields is different too.
      • Top

      Comment

      • Joe L.
        Beyond Control Poster
        • February 1, 1988
        • 43193
        #17
        Re: 1966 427 front knuckle / spindlle and bearings

        Originally posted by Gene Manno (8571)
        Bolts on 63-67 are 7/16". The 69 up are 1/2" bolts. I don't recall the bolt size on 68 but I think it is 1/2" too. Which means the caliper mount along with splash shields is different too.

        Gene-----


        1968 does use 1/2" bolts but uses the 65-67 spindle size.
        In Appreciation of John Hinckley
          • Top

          Comment

          • Gene M.
            Extremely Frequent Poster
            • April 1, 1985
            • 4232
            #18
            Re: 1966 427 front knuckle / spindlle and bearings

            Originally posted by Joe Lucia (12484)
            Gene-----


            1968 does use 1/2" bolts but uses the 65-67 spindle size.
            Great, the old wood block on the shoulders is still working..........!
              • Top

              Comment

              Previous 1 2 template Next
              Working...

              Debug Information

              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"