Missing '66 AIM page "1 Bolt Weld, A4"

[Gary B.]

Does anyone have a source for page "1 Bolt Weld, A4" from the 1966 AIM? That page is missing from my AIM and several other people have reported the same thing. I have the comparable page from the '65 and '67 AIMs, so it should also exist for the '66 AIM. Note that a change was made on that page between '65 and '67, and it's not clear what the '66 AIM shows based on looking at '65 and '67, so those other years don't help me. I need the page from the '66 AIM. Anyone have access to a master copy of the AIM?

Thanks,

Gary

[Donald O.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

Does anyone have a source for page "1 Bolt Weld, A4" from the 1966 AIM? That page is missing from my AIM and several other people have reported the same thing. I have the comparable page from the '65 and '67 AIMs, so it should also exist for the '66 AIM. Note that a change was made on that page between '65 and '67, and it's not clear what the '66 AIM shows based on looking at '65 and '67, so those other years don't help me. I need the page from the '66 AIM. Anyone have access to a master copy of the AIM?

Thanks,

Gary

If you look on UPC 1 Bolt Weld, Sheet A2, you will see in the index that sheets A3 and A4 were not included.

Don

[Gary B.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

If you look on UPC 1 Bolt Weld, Sheet A2, you will see in the index that sheets A3 and A4 were not included.

Don

Don,

Thanks. I didn't notice that. So that means the workers just did without those pages in '66. I wouldn't have guessed that was possible.

Gary

[Donald H.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

I respectfully disagree with your assessment. UPC 1 Bolt Weld, Sheet A1 titled 'CAB Frame Welding Content' lists sheets A3 and A4 as well as other sheets that relate to welding. There are two index sheets in this section. A1 dealing with pages related to welding. Then A2 titled 'Body Asm. - Riveting & Bonding content' listing pages related to riveting and bonding.

By the way, the 67 AIM is exactly the same. Sheet A1 shows sheets A3 and A4, but A2 does not include them, yet the 67 AIM does include sheets A3 and A4.

[Bill W.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

Does anyone have a source for page "1 Bolt Weld, A4" from the 1966 AIM? That page is missing from my AIM and several other people have reported the same thing. I have the comparable page from the '65 and '67 AIMs, so it should also exist for the '66 AIM. Note that a change was made on that page between '65 and '67, and it's not clear what the '66 AIM shows based on looking at '65 and '67, so those other years don't help me. I need the page from the '66 AIM. Anyone have access to a master copy of the AIM?

Thanks,

Gary

Gary,
I have an original AIM used at St. Louis for 1966. I shows sheet A4. Bill

[Gary B.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

Gary,
I have an original AIM used at St. Louis for 1966. I shows sheet A4. Bill

Bill,

Well I'll be. Is there anyway that you could send me a photo or scan and made a PDF of it?

Gary

[Donald H.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

Bill, if you can do a PDF, would you please do both A3 and A4 if you have them?

They both are missing from most or many 66 AIMs.

Thanks,

[Donald O.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

Gary,
I have an original AIM used at St. Louis for 1966. I shows sheet A4. Bill

Bill,

Well I'll be. Is there anyway that you could send me a photo or scan and made a PDF of it?

Gary

Bill, if you can do a PDF, would you please do both A3 and A4 if you have them?

They both are missing from most or many 66 AIMs.

Thanks,

And PLEASE post them here.
Thanks
Don

[Donald O.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

I respectfully disagree with your assessment. UPC 1 Bolt Weld, Sheet A1 titled 'CAB Frame Welding Content' lists sheets A3 and A4 as well as other sheets that relate to welding. There are two index sheets in this section. A1 dealing with pages related to welding. Then A2 titled 'Body Asm. - Riveting & Bonding content' listing pages related to riveting and bonding.

By the way, the 67 AIM is exactly the same. Sheet A1 shows sheets A3 and A4, but A2 does not include them, yet the 67 AIM does include sheets A3 and A4.

Don,
I just had a chance to look in my 66 AIM and respectfully agree with your assessment.

Interesting to note that the sheets listed on Sheet A1 are not listed on Sheet A2, and the sheets listed on Sheet A2 are not listed on Sheet A1.
Don

[Gary B.]

Re: Missing '66 AIM page "1 Bolt Weld, A4"

Courtesy of Bill Wilhelm.

Gary