1972 Fuse Block Photo Needed

[Larry M.]

For a 1972, does anyone have a photo of the firewall side of the fuseblock on an out-of-the-car wiring harness that they can post. New, used or reproduction should be OK.

I need to see that portion of it that accepts the 1/4" bolt that passes into it from the engine compartment and keeps the headlight and engine harnesses held in place.

I would imagine that 1968 through 1976 or so would be similar enough to be helpful to me.

Thanks.

Larry

[Larry M.]

Re: 1972 Fuse Block Photo Needed

Moving this back up in case there's someone who can assist. Thanks.

[Bill L.]

Re: 1972 Fuse Block Photo Needed

Larry:

I found this site (dedicated to documenting the frame off of a '71 NOT a '72!!!)..... Maybe it will help?

The photos are good but not close ups and there is a ton of dirt on the connectors..... here is the link:

http://www.corvette-restoration.com/restoration/body_and_interior/070715_steering_column_removal.htm

Hope this helps a bit...

Regards
Bill

[Larry M.]

Re: 1972 Fuse Block Photo Needed

Bill,

Thanks very much; that's a helpful look at what I need.

The entire site itself is fascinating.

Larry

[Gary R.]

Re: 1972 Fuse Block Photo Needed

Larry
If I remember to bring home my camera I can take a picture of my 72. It's original.

That is a good site, I did work on that car for Tim. He has gone into great detail on that car.

[Bill L.]

Re: 1972 Fuse Block Photo Needed

Larry
If I remember to bring home my camera I can take a picture of my 72. It's original.

That is a good site, I did work on that car for Tim. He has gone into great detail on that car.

********************************

Garry / Larry:

Indeed that is a good site to visit.... some really great photos..... A clear photo always helps waaaaay more than a "windy" verbal explanation ever will!!! And this site certainly has a wealth of good photos and explanations!!!

Regards
Bill

[Larry M.]

Re: 1972 Fuse Block Photo Needed

Gary,

Thanks, I appreciate your offer. If you can do so, please do.

Re-reading my original post, I may not have been as clear as I could have. I need to see the firewall side (or back, I suppose you could call it) of the fuse block, but without the two engine compartment harnesses in place. In particular, I need a close-up, if possible, of the nut area that the harness retaining bolt threads into.

Larry

[Gary R.]

Re: 1972 Fuse Block Photo Needed

Hi Larry
Well that is a bit different, I really don't want to play with that connection after all these years. Sorry.

[Larry M.]

Re: 1972 Fuse Block Photo Needed

Gary,

No apologies needed. I wouldn't ask, or expect, anyone to disturb an existing wiring harness. That was why I thought an out-of-the-car example would be best.

[Gary R.]

Re: 1972 Fuse Block Photo Needed

Thanks Larry. I will look through my photos but I don't ever recall pulling that 73 fuse panel out. I might have some of my 69 but I don't know if they are the same?