Tilt / tele column - NCRS Discussion Boards

Tilt / tele column

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Paul S.
    Very Frequent User
    • June 30, 1982
    • 354

    Tilt / tele column

    Is there any difference in 1969 and up tilt columns ? I need one for a 72 (. I can buy one locallly but the owner thinks it was out of a 76)
  • Bob W.
    Very Frequent User
    • December 1, 1977
    • 799

    #2
    Re: Tilt / tele column

    Paul I have been told that 69-75 are the same.Call precision Corvette Steering Columns he sells 63-68 columns page 16 of the new Driveline.He may know.

    Bob

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193

      #3
      Re: Tilt / tele column

      Originally posted by Bob Winters (1653)
      Paul I have been told that 69-75 are the same.Call precision Corvette Steering Columns he sells 63-68 columns page 16 of the new Driveline.He may know.

      Bob

      Bob and Paul-------

      Yes, 1969-75 tilt/tele columns are interchangeable. However, the turn signal levers are different depending on the year the column was originally installed in.
      In Appreciation of John Hinckley

      Comment

      • Richard M.
        Super Moderator
        • August 31, 1988
        • 11302

        #4
        Re: Tilt / tele column

        Joe, I'm not familiar with the C3 columns. Were they Julian format dated near the hub like on 1967(post January) columns?

        Rich

        Comment

        • Joe L.
          Beyond Control Poster
          • February 1, 1988
          • 43193

          #5
          Re: Tilt / tele column

          Originally posted by Richard Mozzetta (13499)
          Joe, I'm not familiar with the C3 columns. Were they Julian format dated near the hub like on 1967(post January) columns?

          Rich

          Rich------

          That I do not know.
          In Appreciation of John Hinckley

          Comment

          • Paul S.
            Very Frequent User
            • June 30, 1982
            • 354

            #6
            Re: Tilt / tele column

            Thanks for help

            Comment

            Working...

            Debug Information

            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"