turn signal problem - NCRS Discussion Boards

turn signal problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bruce W.
    Very Frequent User
    • June 30, 1997
    • 358

    turn signal problem

    Electrical one of my least favorite problems. I was adjusting my turn signal due to it not staying on in one direction. I could manually move the switch and each light worked fine. Then I lost all power to the switch. checked: no fuses out. checked the power where the wires go into the steering column to see if I had power there. Nothing!! would appreciate anyone's help. this makes no sense to me.
    Bruce
  • Chris S.
    Extremely Frequent Poster
    • January 1, 2000
    • 1064

    #2
    Re: turn signal problem

    are you using a C Central switch? They are not of the highest quality and are known for issues. switch may be bad
    1954 Corvette #3803 - Top Flight 2012, Bloomington Gold 2012,
    Triple Diamond Award 2012, Gold Concourse Award 2012, Regional and National Top Flight 2014
    1954 Corvette #3666 - "The Blue Devil" - Pennant Blue - restoration started
    1957 Corvette - FI 3 sp - Black and Silver

    Comment

    • Richard M.
      Super Moderator
      • August 31, 1988
      • 11302

      #3
      Re: turn signal problem

      Bruce, The feed is the Yellow wire which comes from the Flasher, which is fed by Pink from the IGN switch.

      Key off or bad flasher.

      Rich
      ps This is the wiring for the later C1s but it may help diagnose. IIRC same switch for earlier C1's

      Attached Files

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"