1966 427 425HP Engine compartment - NCRS Discussion Boards

1966 427 425HP Engine compartment

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe T.
    Expired
    • February 25, 2018
    • 153

    1966 427 425HP Engine compartment

    I have looked at many 427 engine layouts and many are different. Per NCRS guidelines where should the correct hoses and clamps be located? As an example does the PVC hose go in front or back of the carburetor? Does the hose from the intake manifold to the power steering go under or over the throttle linkage and plug wires? Carburetor vacuum hose? Does the overflow from the radiator attach to the fan shroud? Please send pictures.. Thank you.
  • Marco H.
    Expired
    • March 1, 2002
    • 218

    #2
    Re: 1966 427 425HP Engine compartment

    Joe,
    I suggest for you to get an 1966 AIM (Assembly Instruction Manual). Many of your questions are addressed in there. The PCV hose routing is described in the 1966 JG, Mech Section 6 Fuel System and Intake Manifold. The overflow hose is addressed in Chassis Section 5 Engine Cooling System. Hope this helps,
    Marco

    Comment

    • Joe T.
      Expired
      • February 25, 2018
      • 153

      #3
      Re: 1966 427 425HP Engine compartment

      Thanks Marco. I have one on order..

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"