'67 Soft Plug For Steering Box End - NCRS Discussion Boards

'67 Soft Plug For Steering Box End

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Leif A.
    Extremely Frequent Poster
    • August 31, 1997
    • 3607

    '67 Soft Plug For Steering Box End

    As the title reads. The question, is there a secret to installing this plug? Before I attempt it, I just wanted to hear from those who have put one in. Thank you.
    Leif
    '67 Coupe L79, M21, C60, N14, N40, J50, A31, U69, A01, QB1
    Top Flight 2017 Lone Star Regional
  • Gary R.
    Extremely Frequent Poster
    • April 1, 1989
    • 1796

    #2
    Re: '67 Soft Plug For Steering Box End

    Clean the bore good, place some ultra gray in the bore, lay in the plug, tap it evenly in place. I use a brass rod to tap it every 90*, once in place use the rod on the center and hit it a couple of times to spread it. You should be able to reuse the original plug, I almost always do- on 100's of them.

    Comment

    • Leif A.
      Extremely Frequent Poster
      • August 31, 1997
      • 3607

      #3
      Re: '67 Soft Plug For Steering Box End

      Gary,
      Thank you for your response. I, unfortunately, was asking about the incorrect part. The plug that I need to know about is the one at the end of the steering linkage that's inserted to block off the extra hole when power steering is used from the factory.
      Leif
      '67 Coupe L79, M21, C60, N14, N40, J50, A31, U69, A01, QB1
      Top Flight 2017 Lone Star Regional

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"