Rear window run for the door glass

[Ed P.]

What adhesive is used to install the fabric into the run? and which side or the fabric is on the window side, not the glued side.
Please
tank u
ed

[Richard M.]

Re: Rear window run for the door glass

Ed,

Any good quality spray adhesive for automotive interior. 3M or equivalent. Make sure you're not using the reproduction felts as they're too thick. This may help....

https://www.forums.ncrs.org/showthre...603#post807603

Download the file: Relining the Rear Window Channels final compr - mod.pdf

[Mark S.]

Re: Rear window run for the door glass

3M Super 77 multipurpose adhesive works well. Also if you have NOS channels, you may need to bend them out a bit, as some of them become too tight with the felt applied.

[Ed P.]

Re: Rear window run for the door glass

3M Super 77 multipurpose adhesive works well. Also if you have NOS channels, you may need to bend them out a bit, as some of them become too tight with the felt applied.

Thank you do you which side is what?
ed

[Mark S.]

Re: Rear window run for the door glass

The fuzzy side goes against the glass and the smooth side is glued to the channel. I belive that this is what you are asking?

[Ed P.]

Re: Rear window run for the door glass

Thank you Mark yes that is what i was asking.

ed