C! Accelerator Rod Finish - NCRS Discussion Boards

C! Accelerator Rod Finish

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sheldon S.
    Very Frequent User
    • March 1, 1999
    • 474

    C! Accelerator Rod Finish

    My car is a 56 with dual four barrels and standard tranny. The accelerator lever and the bracket on the firewall are cad plated, trying to figure out what the rod part that goes through the firewall and the gas pedal pushes on is finished. Mine was rust covered and cleaned rust and looks like it might have been cad plated but not 100% sure. Can some one help out on this.

    Sheldon
  • Dan P.
    Very Frequent User
    • December 1, 1990
    • 683

    #2
    Re: C! Accelerator Rod Finish

    semi flat black

    Comment

    • Sheldon S.
      Very Frequent User
      • March 1, 1999
      • 474

      #3
      Re: C! Accelerator Rod Finish

      Thanks for quick reply

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"