67' steering column/rag jpint install; procedure? - NCRS Discussion Boards

67' steering column/rag jpint install; procedure?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dave K.
    Very Frequent User
    • January 24, 2013
    • 278

    67' steering column/rag jpint install; procedure?

    I have a non-telescoping (manual steer) 67' steering column that Im putting in. Is there a proper procedure for install and rag joint gap etc.
  • Frank D.
    Expired
    • December 27, 2007
    • 2703

    #2
    Re: 67' steering column/rag jpint install; procedure?

    Originally posted by Dave Kocer (57952)
    I have a non-telescoping (manual steer) 67' steering column that Im putting in. Is there a proper procedure for install and rag joint gap etc.
    This should help:
    Attached Files

    Comment

    • Dave K.
      Very Frequent User
      • January 24, 2013
      • 278

      #3
      Re: 67' steering column/rag jpint install; procedure?

      Is the copper ground wire suppose to touch the end of the steering shaft or the side of it. Currently mine is touching the end of the shaft

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"