Coil Spring change - NCRS Discussion Boards

Coil Spring change

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael G.
    Extremely Frequent Poster
    • November 12, 2008
    • 2155

    Coil Spring change

  • Tom L.
    Extremely Frequent Poster
    • October 17, 2006
    • 1439

    #2
    Re: Coil Spring change

    I think the lower ball joint will have to be separated. Easier if the entire knuckle is out of the way.

    Comment

    • Gary B.
      Extremely Frequent Poster
      • February 1, 1997
      • 6979

      #3
      Re: Coil Spring change

      Mike,

      Can you compress the spring with the threaded rod enough to be able to remove the bolts bolts holding the lower A-arm to the frame, then rotate the lower A-arm completely out of the way by rotating about the ball joint, rotating in a plane parallel to the floor?

      gGary

      Comment

      • Michael G.
        Extremely Frequent Poster
        • November 12, 2008
        • 2155

        #4
        Re: Coil Spring change

        Thanks Gary, that worked!!

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"