64 Ride height F & R - NCRS Discussion Boards

64 Ride height F & R

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • John F.
    Extremely Frequent Poster
    • March 23, 2008
    • 2395
    #1

    64 Ride height F & R

    Where is ride height measured from? Is it measured from the ground to F & R of rocker panel, or center line from F & R wheel, ground to fender lip above the tire? Is it in the AIM somewhere? Page/sheet numbers?
    Tags: None
      • Top
    • Gary B.
      Extremely Frequent Poster
      • February 1, 1997
      • 6979
      #2
      Re: 64 Ride height F & R

      John,

      Front and rear trim heights are given in UPC/Sections 3 and 4 in the AIMs.

      Gary
        • Top

        Comment

        • John F.
          Extremely Frequent Poster
          • March 23, 2008
          • 2395
          #3
          Re: 64 Ride height F & R

          Thank you Gary, I knew I saw it somewhere. Sect. 3/ Sheet 6.00 for the front, and Sect 4/ Sheet B5.00 for the rear. Now, is the "J" & "K" measurement taken from the bottom of the quarter panel trim? I read 8.60" front and 8.79" rear.
            • Top

            Comment

            • Gary B.
              Extremely Frequent Poster
              • February 1, 1997
              • 6979
              #4
                • Top

                Comment

                • John F.
                  Extremely Frequent Poster
                  • March 23, 2008
                  • 2395
                  #5
                  Re: 64 Ride height F & R

                  Anyone out there with a Top Flight 64 to take the measurements?
                    • Top

                    Comment

                    Previous template Next
                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"