Missing Something - NCRS Discussion Boards

Missing Something

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Renzo O.
    Expired
    • December 11, 2021
    • 25

    Missing Something

    This is a photo I took from the drivers front axle area looking forward towards the headlights on my 69 C3 coupe (sorry, the image is rotated 90 degrees CCW for some reason!). Can someone tell me what is supposed to be mounted in the bolt holes??
    20220207_205334.jpg
  • Don H.
    Moderator
    • June 16, 2009
    • 2236

    #2
    Re: Missing Something

    Renzo
    I can't tell you what should be in the holes, because the area is too dark. But I can tell you why your photo went sideways. You don't have Orientation Lock locked in Settings on your Iphone....

    Comment

    • Patrick H.
      Beyond Control Poster
      • December 1, 1989
      • 11608

      #3
      Re: Missing Something

      TI amplifier was likely mounted on the other side of that wheel well.
      Vice-Chairman (West), Michigan Chapter NCRS
      71 "deer modified" coupe
      72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
      2008 coupe
      Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

      Comment

      • Renzo O.
        Expired
        • December 11, 2021
        • 25

        #4
        Re: Missing Something

        Dont have an IPhone!

        Comment

        • Renzo O.
          Expired
          • December 11, 2021
          • 25

          #5
          Re: Missing Something

          Thank you,

          Comment

          • Bill B.
            Very Frequent User
            • August 1, 2016
            • 303

            #6
            Re: Missing Something

            Definitely a TI Amp. See the AIM Options section at the end of the book under UPC K66, sheet A1.

            If were to be installed, you would see the lock washers and nuts exposed from those three 9/32" dia holes in your picture.
            Bill Bertelli
            Northeast and Carolinas Chapters Member
            '70 Resto Mod LT-1 w/ partial '70 ZR-1 drivetrain

            Comment

            • James G.
              Very Frequent User
              • August 22, 2018
              • 783

              #7
              Re: Missing Something

              If not mistaken you have a L68, which didn't have it as a requirement, so it was an additional option. Nice.
              James A Groome
              1971 LT1 11130 - https://photos.app.goo.gl/zSoFz24JMPXw5Ffi9 - the black LT1
              1971 LT1 21783 - 3 STAR Preservation.- https://photos.app.goo.gl/wMRDJgmyDyAwc9Nh8 - Brandshatch Green LT1
              My first gen Camaro research http://www.camaros.org/forum/index.p...owposts;u=4337
              Posts on Yenko boards... https://www.yenko.net/forum/search.php?searchid=826453

              Comment

              Working...

              Debug Information

              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"