C1 backing plate to front spindle bolt Torque - NCRS Discussion Boards

C1 backing plate to front spindle bolt Torque

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sheldon S.
    Very Frequent User
    • March 1, 1999
    • 474

    C1 backing plate to front spindle bolt Torque

    Wondering if anyone has these torque specs for the front backing plate to spindle which also holds the steering arms on the lower bolts. I have searched everywhere and can't seem to find a spec. I have them at 45 right now but would like to have correct spec if possible.

    Thanks
    Sheldon
  • David B.
    Very Frequent User
    • March 1, 1980
    • 687

    #2
    Re: C1 backing plate to front spindle bolt Torque

    If you cannot find the answer in the shop manual look in parts book under Grp.6.172 & 5.002. They are 7/16-20 hex hd. should be grade 8. The GM recommended torque for that particular size is 80 ft. lbs. unless stated different in the shop manual.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"