Convert C1 Brakes to Self Adjusting Type - NCRS Discussion Boards

Convert C1 Brakes to Self Adjusting Type

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Christopher R.
    Extremely Frequent Poster
    • March 31, 1975
    • 1599

    Convert C1 Brakes to Self Adjusting Type

    I'm considering converting my '62 brakes to self adjusting by adding '63-'65 self adjusting kits. Any reason I would not want to do this?
  • Richard M.
    Super Moderator
    • August 31, 1988
    • 11302

    #2
    Re: Convert C1 Brakes to Self Adjusting Type

    Only if you put many thousands of miles per year on it in my opinion. It's pretty easy to use a adjuster tool to add a few clicks every so often when you feel the pedal getting a bit lower due to lining wear.

    In the 35+ years and 35k+ miles I put on my '59, I adjusted them maybe once or twice. And that was likely after a couple of master cylinder rebuilds as I recall.

    Rich

    Comment

    • Terry D.
      Extremely Frequent Poster
      • May 31, 1987
      • 2690

      #3
      Re: Convert C1 Brakes to Self Adjusting Type

      Alot of work for very little gain. But that's just my old two cents

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"