Atten: Joe Lucia - NCRS Discussion Boards

Atten: Joe Lucia

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jack J.
    Expired
    • July 31, 2000
    • 640
    #1

    Atten: Joe Lucia

    BF64AF35-B239-49F5-A759-7BAB06BF0106.jpg
    Tags: None
      • Top
    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193
      #2
      Re: Atten: Joe Lucia

      Originally posted by Jack Jagello (34474)
      Joe, in your valued opinion, is Long Island Corvette’s photo with descriptions, a reliable source of information. Thank you, Jack J.[ATTACH=CONFIG]113430[/ATTACH]
      Jack------

      My recollection is that there were THREE cross shafts used over the 1963-67 period. However, I can't confirm that right now as I'm in Italy and FAR away from my references. I have NOS examples of all three [none for sale] and I measured and recorded the angularity of the levers on each. But, one again, I don't have that information at hand.

      The pedal rods look about right but I just don't have the data at hand.

      The fork rods look right from my memory. There were 3 over the 63-67 period.
      In Appreciation of John Hinckley
        • Top

        Comment

        • Jack J.
          Expired
          • July 31, 2000
          • 640
          #3
          Re: Atten: Joe Lucia

          THANK YOU, MUCH APPRECIATED! Enjoy Italy!! J.J.
            • Top

            Comment

            • Richard M.
              Super Moderator
              • August 31, 1988
              • 11302
              #4
              Re: Atten: Joe Lucia

              Gents, Here is a document showing details and dimensions of the Z-bars and push rods from John Hinckley I had saved. (doc or pdf & jpg for quick read)

              Jack, are you suspecting some wrong linkage parts?

              Rich

              ClutchLinkageTech.jpg
              Attached Files
                • Top

                Comment

                Previous template Next
                Working...

                Debug Information

                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"