Minumum Size Tire on Western knockoff - NCRS Discussion Boards

Minumum Size Tire on Western knockoff

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael H.
    Very Frequent User
    • December 1, 2004
    • 118

    Minumum Size Tire on Western knockoff

  • Larry E.
    Extremely Frequent Poster
    • December 1, 1989
    • 1652

    #2
    Re: Minumum Size Tire on Western knockoff

    Depends on what year the Western Knockoff was made. The early ones used the
    K-H molds so they would be identical to the originals(K-H) from the factory. Later made
    Western Knockoffs are unfamiliar to me so I can not say. Larry Picture Below>
    Attached Files
    Larry

    LT1 in a 1LE -- One of 134

    Comment

    • Duke W.
      Beyond Control Poster
      • January 1, 1993
      • 15610

      #3
      Re: Minumum Size Tire on Western knockoff

      I'm not aware that a 7" KO was ever available. Originals and OE repros are 6" wide. There was also an aftermarket 8" version for C3s.

      The specified wheel width is always the inside of bead flange to inside of opposite bead flange dimension, NOT the overall width of the wheel.

      A 6" wheel okay for OE 6.70-15, 7.75-15 sizes, and radial replacement sizes 205/75R-15 and 215/70R-15.

      Duke

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"