61 Side Trim T Studs

[Mark S.]

IMG_4272.jpgIs there a technique of installing these T studs on the side trim of my 61? I do not remember having trouble with these on my 56. Do people use dum dum or a needle nose to help set these studs in place. Maybe the problem is my old hands. Thanks!

[Mike M.]

Re: 61 Side Trim T Studs

I use 3-M black caulking strips cut to about 1/4" per the t-studs. mike

[Mark S.]

Re: 61 Side Trim T Studs

Thanks Mike! That is very helpful!

[David Z.]

Re: 61 Side Trim T Studs

Here is some more info regarding the side molding clips with a tip from John Hinckley.
Dave Z

[Mark S.]

Re: 61 Side Trim T Studs

Thanks! I did use the 3M strip caulk. I also used a marker to identify where the clips would go. I was able to wipe off the marker marks after installation. I used NOS clips, and I did snap one, so do not over tighten them.

[Steven B.]

Re: 61 Side Trim T Studs

When I removed my Dec 56 originally installed pieces in summer of 65 they had black dum dum holding them in position.

[Mark S.]

Re: 61 Side Trim T Studs

My 56 "4200" did not have dum dum securing the original clips.