1966 Glove Box Door

[Curt C.]

I just found a glove box door for my 66 that is in perfect shape except for two dents in the brushed steel part of the front. What is the best way to repair/restore this without drilling out the rivets on the back? Is there someone who provides this service? Thanks.

[Kevin M.]

Re: 1966 Glove Box Door

One method is to cut the brushed steel and place it over the dented one. In either case they are both detectable,there was a good write up about door restoration in the Restorer don't remember which method they used.

Kevin

[Kevin M.]

Re: 1966 Glove Box Door

One method is to cut the brushed steel and place it over the dented one. In either case they are both detectable,there was a good write up about door restoration in the Restorer don't remember which method they used.

Kevin

[Jim S.]

Re: 1966 Glove Box Door

Check the archives by searching for "Gerald Fuccillo" and then find his glove box door restoation posting.

It is also spelled out in detail in The Restorer , volume 33 ,Spring of 07

Jim

[Jim S.]

Re: 1966 Glove Box Door

Check the archives by searching for "Gerald Fuccillo" and then find his glove box door restoation posting.

It is also spelled out in detail in The Restorer , volume 33 ,Spring of 07

Jim

[Gerard F.]

Re: 1966 Glove Box Door

Curt,

Take a look here and in the Spring, 2007 Restorer.

https://www.ncrs.org/forum/archive29.cgi?review=255824

This was a preview of the Restorer article covering a 64-65 glove box door. Works the same for a 66-67 covered in the article also.

Jerry Fuccillo
#42179

[Gerard F.]

Re: 1966 Glove Box Door

Curt,

Take a look here and in the Spring, 2007 Restorer.

https://www.ncrs.org/forum/archive29.cgi?review=255824

This was a preview of the Restorer article covering a 64-65 glove box door. Works the same for a 66-67 covered in the article also.

Jerry Fuccillo
#42179

[Curt C.]

Re: 1966 Glove Box Door

Thanks Jerry. I have looked all of this over and will be attempting this soon. Hopefully it works as well for me as for you. Best wishes.

[Curt C.]

Re: 1966 Glove Box Door

Thanks Jerry. I have looked all of this over and will be attempting this soon. Hopefully it works as well for me as for you. Best wishes.