67 wiring

[Jeremy Hedges]

I am working on a resto-rod and need to hook up something to make it hot when the key is on. Can I do that at the ACC. on the fuse box? Or is that hot the whole time the battery is hooked up. Or should I get that from the wiring on the back of the iginition switch? If so what wire? Red, Purple, Pink etc.
Thanks

Jeremy Hedges
#31711

[Jim T.]

Re: 67 wiring

If your 67's fuse block is like my 68's, just put a connection to the IGN position in the fuse block.

[Jim T.]

Re: 67 wiring

If your 67's fuse block is like my 68's, just put a connection to the IGN position in the fuse block.

[Albert P.]

Re: 67 wiring

You could connect to the key side of the ballast resistor which is hot when the ignition key is on.

[Albert P.]

Re: 67 wiring

You could connect to the key side of the ballast resistor which is hot when the ignition key is on.