What years are pipes 3822581 and 3822582 correct for? - NCRS Discussion Boards

What years are pipes 3822581 and 3822582 correct for?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brad M.
    Expired
    • July 31, 2005
    • 262

    What years are pipes 3822581 and 3822582 correct for?

    I was wondering what the correct applications are for 2 inch small block pipes part numbers 3822581 and 3822582.
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: What years are pipes 3822581 and 3822582 correct for?

    Brad-----


    GM #3822581 and 3822582 are the left and right front exhaust pipes for 1963-only Corvettes with small block and all 250 hp or 300 hp with Powerglide.
    In Appreciation of John Hinckley

    Comment

    • Brad M.
      Expired
      • July 31, 2005
      • 262

      #3
      Re: What years are pipes 3822581 and 3822582 correct for?

      Thanks Joe

      Comment

      • Dick W.
        Former NCRS Director Region IV
        • June 30, 1985
        • 10483

        #4
        Re: What years are pipes 3822581 and 3822582 correct for?

        Brad, Gardners Exhaust may have some interest in those pipes to make paterns.
        Dick Whittington

        Comment

        • Brad M.
          Expired
          • July 31, 2005
          • 262

          #5
          Re: What years are pipes 3822581 and 3822582 correct for?

          Dick,
          Do you know if that system is one that Gardner's is not yet making? (answer to that may be on their site if you do not know - I can check).

          It seems that they are maybe more interested in factory installed systems rather than service replacement ones, but I am open to giving them up if they need them.

          Comment

          • Joe L.
            Beyond Control Poster
            • February 1, 1988
            • 43193

            #6
            Re: What years are pipes 3822581 and 3822582 correct for?

            Brad-----


            The forward pipes you described should be the same, PRODUCTION or SERVICE. Of course, if they are much later SERVICE pieces, there may be some minor differences from PRODUCTION and original SERVICE. The rear pipes and mufflers are different for PRODUCTION and SERVICE (except N-11). However, the "core" configuration is the same.
            In Appreciation of John Hinckley

            Comment

            • Terry M.
              Beyond Control Poster
              • September 30, 1980
              • 15573

              #7
              Re: What years are pipes 3822581 and 3822582 correct for?

              Brad,
              You might want to communicate with Gardners. If they have an interest in them, I doubt you would have to give them up permanently. Might be a year or so, depending on where they are with their construction plans -- a conversation with them would clear that up. There might be a "reward" for you depending on how bad they want/need the examples.

              I know they are on the hunt for 2-inch 4-speed systems for 1969s, but I am not sure what their mid-year plans are.
              Terry

              Comment

              • Dick W.
                Former NCRS Director Region IV
                • June 30, 1985
                • 10483

                #8
                Re: What years are pipes 3822581 and 3822582 correct for?

                They are making the '65-'67 systems but not the '63-'64.
                Dick Whittington

                Comment

                • Brad M.
                  Expired
                  • July 31, 2005
                  • 262

                  #9
                  Re: What years are pipes 3822581 and 3822582 correct for?

                  Thanks, I will call them.

                  Comment

                  Working...

                  Debug Information

                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"