C2 Battery Spacers - NCRS Discussion Boards

C2 Battery Spacers

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Craig C.
    Expired
    • July 31, 1996
    • 27
    #1

    C2 Battery Spacers

    Are battery spacers correct for 1966, if so do they go in the corners of the battery tray? I do not see them pictured in the AIM. I bought a set from a vendor and I want to install my battery correctly. Thanks, Craig
    Tags: None
      • Top
    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193
      #2
      Re: C2 Battery Spacers

      Originally posted by Craig Carnathan (27938)
      Are battery spacers correct for 1966, if so do they go in the corners of the battery tray? I do not see them pictured in the AIM. I bought a set from a vendor and I want to install my battery correctly. Thanks, Craig
      Craig-----

      If what you're talking about are small plastic or rubber pieces, I believe these are attached to the corners of the battery HOLD-DOWN bracket. I don't think these were ever used in PRODUCTION, although it's possible they were part of the original hold-down brackets. Not to my recollection, though.
      In Appreciation of John Hinckley
        • Top

        Comment

        • Timothy B.
          Extremely Frequent Poster
          • April 30, 1983
          • 5177
          #3
          Re: C2 Battery Spacers

          Craig,
          I think the spacers were to be install on 63 corvette's but they make the positive battery cable dangerously close the the top battery shield. There is a 1963 TSB (I believe) to remove them if this condition exists and I don't know if they were used after 63.
            • Top

            Comment

            • Craig C.
              Expired
              • July 31, 1996
              • 27
              #4
              Re: C2 Battery Spacers

              Joe and Timothy, Excellent, thank you.
                • Top

                Comment

                • Mike M.
                  Director Region V
                  • August 31, 1994
                  • 1463
                  #5
                  Re: C2 Battery Spacers

                  They were not present on any of the original MY's I have seen.
                  HaND
                    • Top

                    Comment

                    • Robert I.
                      Very Frequent User
                      • July 31, 2004
                      • 164
                      #6
                      Re: C2 Battery Spacers

                      How are they attached to the battery hold-down tray? Glue?
                      ____________________

                      Bob Immler
                        • Top

                        Comment

                        • Edward J.
                          Extremely Frequent Poster
                          • September 15, 2008
                          • 6940
                          #7
                          Re: C2 Battery Spacers

                          Originally posted by Timothy Barbieri (6542)
                          Craig,
                          I think the spacers were to be install on 63 corvette's but they make the positive battery cable dangerously close the the top battery shield. There is a 1963 TSB (I believe) to remove them if this condition exists and I don't know if they were used after 63.

                          Craig, I am with Tim, early 63 had them and then went away because of positive cable grounding out. Would not use them.
                          New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.
                            • Top

                            Comment

                            • Robert I.
                              Very Frequent User
                              • July 31, 2004
                              • 164
                              #8
                              Re: C2 Battery Spacers

                              "Craig, I am with Tim, early 63 had them and then went away because of positive cable grounding out. Would not use them."


                              Yes, I got them via Ebay and I'm going to return them.
                              ____________________

                              Bob Immler
                                • Top

                                Comment

                                • Mike M.
                                  Director Region V
                                  • August 31, 1994
                                  • 1463
                                  #9
                                  Re: C2 Battery Spacers

                                  Yep, Tim nailed it.

                                  FYI to answer Bob's second question, there were not cemented.

                                  Just held in place by tightening down the top bracket.

                                  Originals were rubber.

                                  HaGD
                                    • Top

                                    Comment

                                    Previous template Next
                                    Working...

                                    Debug Information

                                    Searching...Please wait.
                                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                    Please push the back button and reload the previous window.'
                                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                    Please push the back button and reload the previous window.'
                                    An internal error has occurred and the module cannot be displayed.
                                    There are no results that meet this criteria.
                                    Search Result for "|||"