Float levels

[Mark K.]

OK guys, I need to readjust my float levels on the end carbs on my 435. Since I want to lower to fuel level in the bowl, which way do I turn the adjusting screw? Clockwise or counerclockwise??? Sorry for this senior moment.....

[John H.]

Re: Float levels

Mark -

Turn the adjusting nut clockwise to lower the float level, counter-clockwise to raise it.

[Bill I.]

Re: Float levels

Mark, as always, John is correct. Remember, it's not the screw you adjust, it's the nut. The screw locks it down. Turn nut to the right. Bill.

[Mark K.]

Re: Float levels

Mark -

Turn the adjusting nut clockwise to lower the float level, counter-clockwise to raise it.

Thanks John. As always, I appreciate your help. I'm glad I have the car running again - leaky carbs and all that.