66 Dash install - NCRS Discussion Boards

66 Dash install

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Peter J.
    Very Frequent User
    • September 30, 1994
    • 586

    66 Dash install

    I was just removing the bolts around the winshield and before I go any further I wanted to make sure I can install my dash after putting new pads on with the winshield on the car. It looks like a close fit with the ws gasket. I have everything else out of the way but if the winshield has to out again, I will have to give some serious thought to how much fun this do it yourself hobby is.
    Thanks for the input,
    Pete
  • Wayne P.
    Extremely Frequent Poster
    • August 31, 1975
    • 1025

    #2
    Re: 66 Dash install

    No problem with the windshield already installed.

    Comment

    • Peter J.
      Very Frequent User
      • September 30, 1994
      • 586

      #3
      Re: 66 Dash install

      Thanks Wayne. She poped right out. I was concerned about how close the dash was to the gasket and if it had to go straight up or if there was any give when the I took the bolts out.
      Not a fun job, but I would not like to try to get the dash pad clips out of the console while still in the car.
      Pete

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"