C1 Firewall Pad Installation - NCRS Discussion Boards

C1 Firewall Pad Installation

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Richard H.
    Expired
    • March 1, 1985
    • 241

    C1 Firewall Pad Installation

    Installing the three pads. Right and left are clear. Center piece has me confused. Any diagram that shows its location or suggestion for placement. Thanks.
  • Bob B.
    Very Frequent User
    • March 1, 2003
    • 831

    #2
    Re: C1 Firewall Pad Installation

    Richard,

    The center piece placement should be pretty obvious and go right where the piece you took off went - forward of the transmission hump. And there should be the holes for the grommets in it that hold it on that will match with the holes for same in your firewall. There were variations of the insulation for different options so, if you can't match holes, then maybe the one you have is not the right one for your car.

    Bob

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"