67 DS Horn With AC Mounting AGAIN!!! - NCRS Discussion Boards

67 DS Horn With AC Mounting AGAIN!!!

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Wayne W.
    Extremely Frequent Poster
    • April 30, 1982
    • 3605
    #16
    Re: 67 DS Horn With AC Mounting AGAIN!!!

    Originally posted by Kirk McHugh (46057)
    Good question. Any big blocks with AC and horns out there?
    67 BB/AC. Cannot vouch for the bolt.






    67 SB/AC

      • Top

      Comment

      • Warren S.
        Expired
        • April 30, 1987
        • 100
        #17
        Re: 67 DS Horn With AC Mounting AGAIN!!!

        Originally posted by Bill Caldwell (15218)
        Kirk,
        Thanks, hopefully now some others will jump on my question about the type of bolts used.
        Bill

        Bill,
        Both my left and right horn is mounted using the same type of bolt as Wayne Womble's pictured post above and they are the original bolts to my 67 A/C car.
        Warren
          • Top

          Comment

          • Warren S.
            Expired
            • April 30, 1987
            • 100
            #18
            Re: 67 DS Horn With AC Mounting AGAIN!!!

            Originally posted by Warren Schindler (11327)
            Bill,
            Both my left and right horn is mounted using the same type of bolt as Wayne Womble's pictured post above and they are the original bolts to my 67 A/C car.
            Warren

            After a closer look my bolts are identical to Wayne's with the circle on top of the head, but my washers are separate from the heads. It appears that the washer is part of the bolt head in Wayne's photo.
            Warren
              • Top

              Comment

              • Wayne W.
                Extremely Frequent Poster
                • April 30, 1982
                • 3605
                #19
                Re: 67 DS Horn With AC Mounting AGAIN!!!

                Originally posted by Warren Schindler (11327)
                After a closer look my bolts are identical to Wayne's with the circle on top of the head, but my washers are separate from the heads. It appears that the washer is part of the bolt head in Wayne's photo.
                Warren
                I agree. I dont think that bolt is correct.
                  • Top

                  Comment

                  Previous 1 2 template Next
                  Working...

                  Debug Information

                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"