54 Peculiar Powerglide Puke - NCRS Discussion Boards

54 Peculiar Powerglide Puke

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe R.
    Very Frequent User
    • July 31, 1994
    • 287

    54 Peculiar Powerglide Puke

    I have been experiencing leaks from my 54 Powerglide trans, and a peculiar "puke" out of the dipstick tube. Upon cold starting, it will occasionally leak out about a pint of fluid through the dipstick tube. I have checked the fluid level carefully, and it will still pump out fluid now and then. I have heard others recommend starting the engine with the trans in neutral, which seems to resolve the issue, but I want to fix the issue, rather than find a way around it.

    Any suggestions?
  • Roy B.
    Expired
    • February 1, 1975
    • 7044

    #2
    Re: 54 Peculiar Powerglide Puke

    I hear people ask that question over and over> 99% of the time it's the filter seal leaking AIR , It's ether loose , torn , or a harden seal .where the filter TWO screws come loose or the seal is bad.
    It's a easy fix removing the dip stick cover plate R/S , good luck.

    Also the tube stick seal has the same problem (leaking oil)!!

    Comment

    • Joe R.
      Very Frequent User
      • July 31, 1994
      • 287

      #3
      Re: 54 Peculiar Powerglide Puke

      Thanks Roy. Is that plate and filter repairable with the trans in the car?

      Comment

      • Roy B.
        Expired
        • February 1, 1975
        • 7044

        #4
        Re: 54 Peculiar Powerglide Puke

        Originally posted by Joe Ryan (24865)
        Thanks Roy. Is that plate and filter repairable with the trans in the car?
        Yes a no brainier, usually you can re-use the cover gasket just add some sealer but if the seal is bad you need to locate one for the filter and stick tube O-ring. I may have them if you do it.
        PS: all 6 or 8 PG is the same any year cast iron PG

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"