Building a 283 to 301 stroker. - NCRS Discussion Boards

Building a 283 to 301 stroker.

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Timothy B.
    Extremely Frequent Poster
    • April 30, 1983
    • 5177
    #31
    Re: Building a 283 to 301 stroker.

    Mike,

    I remember your post now that you mention it. My car is 300HP but I see what you are talking about.
      • Top

      Comment

      • Michael H.
        Expired
        • January 29, 2008
        • 7477
        #32
        Re: Building a 283 to 301 stroker.

        Originally posted by Timothy Barbieri (6542)
        Mike,

        I remember your post now that you mention it. My car is 300HP but I see what you are talking about.
        Yup, all 62, 63 and early 64's with 8" balancer, have an incorrect timing tab. The tab is actually the same tab used for a 6" balancer so the timing marks mean nothing. Their incorrect. The only part of the tab that is correct is the "0", or TDC.
        For those cars, if the timing is set to 12* on the timing plate, the timing is actually only at about 9*.

        I would use the tape method for both base idle and full advance adjustments.
          • Top

          Comment

          Previous 1 2 3 template Next
          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"