c-2 question

[Butch S.]

To get the clutch pedal out of my big block 65, to replace the bushings and repair the shaft were the weld is broken, I am lost, I spent about and hour last night standing on the head under the dash and I still do not know what to pull out to fix the side ways movement of my clutch pedal? any help would be greaty appreacited,

Thanks again

Butch

[Wayne M.]

Re: c-2 question

To get the clutch pedal out of my big block 65, to replace the bushings and repair the shaft were the weld is broken, I am lost, I spent about and hour last night standing on the head under the dash and I still do not know what to pull out to fix the side ways movement of my clutch pedal? ...Butch

Butch -- was my response yesterday, and the link to a previous thread that I posted not sufficient to describe the options ?

Here's yesterday's link (which contains another link to solutions offered by other members). Email me if nothing works -- my solution was the most drastic .

https://www.forums.ncrs.org/showthre...65711&uid=7621

[Butch S.]

Re: c-2 question

Wayne, I am sorry I did not see the link to your treads from before, This is everything I was looking for, I am sorry that wasted you time but I really appreciated you getting back to me. again this is a great web site.
thanks you very much

Butch

[Wayne M.]

Re: c-2 question

Butch -- no problem. Here's a pic of how bad mine was. Living on borrowed time before the clutch pedal would fall off approaching a stop light .

My NOS replacement has a bead of weld on the top of where the rod protrudes though the pedal (maybe they realized they had a problem ).

[Butch S.]

Re: c-2 question

Wayne
Thanks for the info, my unit is not broken like that, but were the pedal and shift connect it is about to fall apart, I have a good weekend project, parts on UPS now, shows I should have them in the a.m. at worst I can get it pulled apart and get everything cleaned up and ready to put together. Again I really apprciate all of the help, I am learning so much about my car, THANK !!!!!

Best regards

Butch Stroupe