Finish for the 1960 nose brace rods? - NCRS Discussion Boards

Finish for the 1960 nose brace rods?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dick G.
    Very Frequent User
    • May 31, 1988
    • 681

    Finish for the 1960 nose brace rods?

    Can someone share with me what finish these 2 rods for the front nose should be? These 2 rods also have 2 flat pieces bolted to them, which in turn are glued to the fiberglass nose. My 2 braces were covered in rust with no signs of being painted. The condition makes me think they were plated.
    Thanks DG
  • Doug F.
    Very Frequent User
    • November 1, 1983
    • 322

    #2
    Re: Finish for the 1960 nose brace rods?

    i don't think they are plated, probably just natural metal finish or a thin coat of semi gloss black, they were in place when the car was painted so some overspray may be in order, the brackets you refer to should be riveted to the nose 4 rivets per bracket

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"