65 wiring placement ?

[Donald S.]

i need some help with the mounting locations for the plastic wiring holders that go through the inner fenders on the left side and right side i cant find a page in the aim that gives measurements from reference points . i am wondering if these were measured points , or did they just install 2 per side with no real definitive placement? thanks Don..

[Mike M.]

Re: 65 wiring placement ?

The holes had specific and consistent locations, however, As the panels were pre-drilled before being supplied to the assembly line, the specs you are looking for would not be in the aim.
Perhaps someone can jump in with information beyond the AIM and/or reference measurements from original cars.
HaND

[Dale S.]

Re: 65 wiring placement ?

Donald, check you email. dale

[Donald S.]

thanks Dale >

thanks Dale does your car have the k66 option ? and if so does the wiring run down the passenger side with the surge tank hose ? thanks Don anyone with a 65 bb that can help it would be appreciated >