1969 Power Window Breaker Finish - NCRS Discussion Boards

1969 Power Window Breaker Finish

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Craig C.
    Frequent User
    • July 31, 1999
    • 51

    1969 Power Window Breaker Finish

    Similar to the firewall blackout questions below, I just cleaned up my power window breaker which resides on the firewall. Was this blacked out with the rest of the firewall or installed later and have a natural finish? The engine compartment had been re-blacked by a previous owner so it is difficult to tell what is what.

    Thanks for the help.

    Craig
  • Terry M.
    Beyond Control Poster
    • September 30, 1980
    • 15573

    #2
    Re: 1969 Power Window Breaker Finish

    The PW breaker was installed after black-out. I believe the finish should be a silver color plate -- zinc most likely. Wait for other opinions on the finish to be sure, though. Don't take only my word.
    Terry

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"