58 wiper shaft - NCRS Discussion Boards

58 wiper shaft

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brad H.
    Expired
    • August 12, 2007
    • 724

    58 wiper shaft

    My pass. side wiper shaft pops up when running wipers. I am able to take the whole thing out and put back in with ease, no their is not anything on the shaft when it comes out, only shaft, what is the easiest way to work on this, can it be pushed in and held in place, can you put shaft in from under dash and fix or is this a take out the unit from under the dash and rebuild, if so is this easy to do with some direction or send in? Thanks Brad
  • Mike E.
    Extremely Frequent Poster
    • February 28, 1975
    • 5134

    #2
    Re: 58 wiper shaft

    You probably will need a new wiper transmission on that side. You'll see that the bottom of the shaft is splined--so is the bottom spool in the transmission. If it no longer will stay in there, the spool may be hogged out.
    Before you do that, though, try this 2-man job.
    Have someone under the dash holding against that bottom spool center with something substantial. Then tap on the top of the shaft. If it stays in, you don't need a new wiper trans, if it doesn't, you do.

    Comment

    • Brad H.
      Expired
      • August 12, 2007
      • 724

      #3
      Re: 58 wiper shaft

      Thanks Mike will try that first. Brad

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"